Highly porous phosphate-based glasses for controlled delivery of antibacterial Cu ions prepared via sol-gel chemistry.

Mesoporous glasses are a promising class of bioresorbable biomaterials characterized by high surface area and extended porosity in the range of 2 to 50 nm. These peculiar properties make them ideal materials for the controlled release of therapeutic ions and molecules. Whilst mesoporous silicate-based glasses (MSG) have been widely investigated, much less work has been done on mesoporous phosphate-based glasses (MPG). In the present study, MPG in the P2O5-CaO-Na2O system, undoped and doped with 1, 3, and 5 mol% of Cu ions were synthesized via a combination of the sol-gel method and supramolecular templating. The non-ionic triblock copolymer Pluronic P123 was used as a templating agent. The porous structure was studied via a combination of Scanning Electron Microscopy (SEM), Small-Angle X-ray Scattering (SAXS), and N2 adsorption-desorption analysis at 77 K. The structure of the phosphate network was investigated via solid state 31P Magic Angle Spinning Nuclear Magnetic Resonance (31P MAS-NMR) and Fourier Transform Infrared (FTIR) spectroscopy. Degradation studies, performed in water via Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES), showed that phosphates, Ca2+, Na+ and Cu ions are released in a controlled manner over a 7 days period. The controlled release of Cu, proportional to the copper loading, imbues antibacterial properties to MPG. A significant statistical reduction of Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) bacterial viability was observed over a 3 days period. E. coli appeared to be more resistant than S. aureus to the antibacterial effect of copper. This study shows that copper doped MPG have great potential as bioresorbable materials for controlled delivery of antibacterial ions.

Silver-doped phosphate coacervates to inhibit pathogenic bacteria associated with wound infections: an in vitro study.

There is a great demand from patients requiring skin repair, as a result of poorly healed acute wounds or chronic wounds. These patients are at high risk of constant inflammation that often leads to life-threatening infections. Therefore, there is an urgent need for new materials that could rapidly stimulate the healing process and simultaneously prevent infections. Phosphate-based coacervates (PC) have been the subject of increased interest due to their great potential in tissue regeneration and as controlled delivery systems. Being bioresorbable, they dissolve over time and simultaneously release therapeutic species in a continuous manner. Of particular interest is the controlled release of metallic antibacterial ions (e.g. Ag+), a promising alternative to conventional treatments based on antibiotics, often associated with antibacterial resistance (AMR). This study investigates a series of PC gels containing a range of concentrations of the antibacterial ion Ag+ (0.1, 0.3 and 0.75 mol%). Dissolution tests have demonstrated controlled release of Ag+ over time, resulting in a significant bacterial reduction (up to 7 log), against both non-AMR and AMR strains of both Gram-positive and Gram-negative bacteria (Staphylococcus aureus, Enterococcus faecalis, Escherichia coli and Pseudomonas aeruginosa). Dissolution tests have also shown controlled release of phosphates, Ca2+, Na+ and Ag+ with most of the release occurring in the first 24 h. Biocompatibility studies, assessed using dissolution products in contact with human keratinocyte cells (HaCaT) and bacterial strains, have shown a significant increase in cell viability (p ≤ 0.001) when gels are dissolved in cell medium compared to the control. These results suggest that gel-like silver doped PCs are promising multifunctional materials for smart wound dressings, being capable of simultaneously inhibit pathogenic bacteria and maintain good cell viability.

Mesoporous Strontium-Doped Phosphate-Based Sol-Gel Glasses for Biomedical Applications.

Mesoporous phosphate-based glasses have great potential as biomedical materials being able to simultaneously induce tissue regeneration and controlled release of therapeutic molecules. In the present study, a series of mesoporous phosphate-based glasses in the P2O5-CaO-Na2O system, doped with 1, 3, and 5 mol% of Sr2+, were prepared using the sol-gel method combined with supramolecular templating. A sample without strontium addition was prepared for comparison. The non-ionic triblock copolymer EO20PO70EO20 (P123) was used as a templating agent. Scanning electron microscopy (SEM) images revealed that all synthesized glasses have an extended porous structure. This was confirmed by N2 adsorption-desorption analysis at 77 K that shows a porosity typical of mesoporous materials. 31P magic angle spinning nuclear magnetic resonance (31P MAS-NMR) and Fourier transform infrared (FTIR) spectroscopies have shown that the glasses are mainly formed by Q1 and Q2 phosphate groups. Degradation of the glasses in deionized water assessed over a 7-day period shows that phosphate, Ca2+, Na+, and Sr2+ ions can be released in a controlled manner over time. In particular, a direct correlation between strontium content and degradation rate was observed. This study shows that Sr-doped mesoporous phosphate-based glasses have great potential in bone tissue regeneration as materials for controlled delivery of therapeutic ions.

Mesoporous Phosphate-Based Glasses Prepared via Sol-Gel.

In the present study, a mesoporous phosphate-based glass (MPG) in the P2O5-CaO-Na2O system was synthesized, for the first time, using a combination of sol-gel chemistry and supramolecular templating. A comparison between the structural properties, bioactivity, and biocompatibility of the MPG with a non-porous phosphate-based glass (PG) of analogous composition prepared via the same sol-gel synthesis method but in the absence of a templating surfactant is also presented. Results indicate that the MPG has enhanced bioactivity and biocompatibility compared to the PG, despite having a similar local structure and dissolution properties. In contrast to the PG, the MPG shows formation of hydroxycarbonate apatite (HCA) on its surface after 24 h of immersion in simulated body fluid. Moreover, MPG shows enhanced viability of Saos-2 osteosarcoma cells after 7 days of culturing. This suggests that textural properties (porosity and surface area) play a crucial role in the kinetics of HCA formation and in interaction with cells. Increased efficiency of drug loading and release over non-porous PG systems was proved using the antibiotic tetracycline hydrochloride as a drug model. This study represents a significant advance in the field of mesoporous materials for drug delivery and bone tissue regeneration as it reports, for the first time, the synthesis, structural characterization, and biocompatibility of mesoporous calcium phosphate glasses.

Antibacterial silver-doped phosphate-based glasses prepared by coacervation.

Phosphate-based glasses are materials of great interest for the regeneration and repair of damaged hard or soft tissues. They have the desirable property of slowly dissolving in the physiological environment, eventually being totally replaced by regenerated tissue. Being bioresorbable, they can simultaneously induce tissue regeneration and deliver therapeutic agents (e.g. antibacterial ions) in a controlled way. In this work, we have synthesised a series of glasses in the P2O5-CaO-Na2O system doped with Ag2O using the coacervation method. The addition of silver is known to provide the glass with antibacterial properties due to the release of Ag+ ions into the body fluid. The coacervation method is a facile, water-based technique which offers significant advantages over the conventional melt-quench route for preparing phosphate-based glasses which requires melting of metal oxide powders at high temperatures (1000-1200 °C). The properties of the initial colloidal polyphosphate systems (coacervates) as a function of the Ag2O content were characterised using rheology and liquid state 31P NMR. The effect of Ag+ addition on the final dried glasses was investigated using thermal analysis, Raman spectroscopy and X-ray diffraction. The antibacterial activity was assessed against Staphylococcus aureus (S. aureus), a bacterial strain commonly found in post-surgery infections. A dose-dependent antimicrobial effect was seen with an increasing silver content.

Antibacterial Copper-Doped Calcium Phosphate Glasses for Bone Tissue Regeneration.

Calcium phosphate glasses are a promising new generation of biomaterials that can simultaneously induce tissue regeneration and controlled release of therapeutic molecules. In this work, novel calcium phosphate glasses containing 0, 2, 4, and 6 mol % Cu2+ were synthesized via room temperature precipitation reaction in aqueous solution. The effect of Cu2+ addition on the glass properties and structure was investigated using thermal analysis, 31P solid-state MAS NMR, Raman spectroscopy, and X-ray diffraction. All glasses crystallize at temperature >500 °C and are mainly formed by Q1 groups. The release of P, Ca, and Cu in solution over time was monitored via inductively coupled plasma-optical emission spectroscopy. It was found that with increasing Cu content, the amount of P and Ca released decreases whereas the amount of Cu released increases. The effect of Cu2+ release on the antibacterial activity against S. aureus, a bacterial strain commonly found in postsurgery infections, has been investigated. The addition of copper has been shown to infer the glasses antibacterial properties. As expected, the antibacterial activity of the glasses increases with increasing Cu2+ content. Cytocompatibility was assessed by seeding human osteoblast-like osteosarcoma cells Saos-2 (HTB85) on the glass particles. A significant increase in cell number was observed in all the glasses investigated. The copper-doped calcium phosphate glasses have proven to be multifunctional, as they combine bone regenerative properties with antibacterial activity. Therefore, they have great potential as antibacterial bioresorbable materials for hard tissue regeneration.

Cation distribution and vacancies in nickel cobaltite.

Samples of nickel cobaltite, a mixed oxide occurring in the spinel structure which is currently extensively investigated because of its prospective application as ferromagnetic, electrocatalytic, and cost-effective energy storage material were prepared in the form of nanocrystals stabilized in a highly porous silica aerogel and as unsupported nanoparticles. Nickel cobaltite nanocrystals with average size 4 nm are successfully grown for the first time into the silica aerogel provided that a controlled oxidation of the metal precursor phases is carried out, consisting in a reduction under H2 flow followed by mild oxidation in air. The investigation of the average oxidation state of the cations and of their distribution between the sites within the spinel structure, which is commonly described assuming the Ni cations are only located in the octahedral sites, has been carried out by X-ray absorption spectroscopy providing evidence for the first time that the unsupported nickel cobaltite sample has a Ni : Co molar ratio higher than the nominal ratio of 1 : 2 and a larger than expected average overall oxidation state of the cobalt and nickel cations. This is achieved retaining the spinel structure, which accommodates vacancies to counterbalance the variation in oxidation state.

Investigation of the Switching Mechanism in TiO2-Based RRAM: A Two-Dimensional EDX Approach.

The next generation of nonvolatile memory storage may well be based on resistive switching in metal oxides. TiO2 as transition metal oxide has been widely used as active layer for the fabrication of a variety of multistate memory nanostructure devices. However, progress in their technological development has been inhibited by the lack of a thorough understanding of the underlying switching mechanisms. Here, we employed high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) combined with two-dimensional energy dispersive X-ray spectroscopy (2D EDX) to provide a novel, nanoscale view of the mechanisms involved. Our results suggest that the switching mechanism involves redistribution of both Ti and O ions within the active layer combined with an overall loss of oxygen that effectively render conductive filaments. Our study shows evidence of titanium movement in a 10 nm TiO2 thin-film through direct EDX mapping that provides a viable starting point for the improvement of the robustness and lifetime of TiO2-based resistive random access memory (RRAM).

Copper-Based Catalysts Supported on Highly Porous Silica for the Water Gas Shift Reaction.

Copper-based nanoparticles, supported on either a silica aerogel or cubic mesostructured silicas obtained by using two different synthetic protocols, were used as catalysts for the water gas shift reaction. The obtained nanocomposites were thoroughly characterised before and after catalysis through nitrogen adsorption-desorption measurements at -196 °C, TEM, and wide- and low-angle XRD. The samples before catalysis contained nanoparticles of copper oxides (either CuO or Cu2 O), whereas the formation of metallic copper nanoparticles, constituting the active catalytic phase, was observed either by using pre-treatment in a reducing atmosphere or directly during the catalytic reaction owing to the presence of carbon monoxide. A key role in determining the catalytic performances of the samples is played by the ability of different matrices to promote a high dispersion of copper metal nanoparticles. The best catalytic performances are obtained with the aerogel sample, which also exhibits constant carbon monoxide conversion values at constant temperature and reproducible behaviour after subsequent catalytic runs. On the other hand, in the catalysts based on cubic mesostructured silica, the detrimental effects related to sintering of copper nanoparticles are avoided only on the silica support, which is able to produce a reasonable dispersion of the copper nanophase.

Surface and Electrical Characterization of Ag/AgCl Pseudo-Reference Electrodes Manufactured with Commercially Available PCB Technologies.

Lab-on-Chip is a technology that could potentially revolutionize medical Point-of-Care diagnostics. Considerable research effort is focused towards innovating production technologies that will make commercial upscaling financially viable. Printed circuit board manufacturing techniques offer several prospects in this field. Here, we present a novel approach to manufacturing Printed Circuit Board (PCB)-based Ag/AgCl reference electrodes, an essential component of biosensors. Our prototypes were characterized both structurally and electrically. Scanning Electron Microscopy (SEM) and X-Ray Photoelectron Spectroscopy (XPS) were employed to evaluate the electrode surface characteristics. Electrical characterization was performed to determine stability and pH dependency. Finally, we demonstrate utilization along with PCB pH sensors, as a step towards a fully integrated PCB platform, comparing performance with discrete commercial reference electrodes.

Relationship of CYP21A2 genotype and serum 17-hydroxyprogesterone and cortisol levels in a large cohort of Italian children with premature pubarche.

OBJECTIVE: Premature pubarche (PP) is the most frequent sign of nonclassic congenital adrenal hyperplasia (NCCAH) due to 21-hydroxylase deficiency in childhood. The aim of this study was to assess the relationship between the CYP21A2 genotype and baseline and ACTH-stimulated 17-hydroxyprogesterone (17-OHP) and cortisol serum levels in patients presenting with PP. PATIENTS AND METHODS: A total of 152 Italian children with PP were studied. Baseline and ACTH-stimulated 17-OHP and cortisol serum levels were measured and CYP21A2 gene was genotyped in all subjects. RESULTS: Baseline and ACTH-stimulated serum 17-OHP levels were significantly higher in NCCAH patients than in both heterozygotes and children with idiopathic PP (IPP). Of the patient population, four NCCAH patients (7.3%) exhibited baseline 17-OHP values <2 ng/ml (6 nmol/l). An ACTH-stimulated 17-OHP cutoff level of 14 ng/ml (42 nmol/l) identified by the receiver-operating characteristics curves showed the best sensitivity (90.9%) and specificity (100%) in distinguishing NCCAH patients. This value, while correctly identifying all unaffected children, missed 9% of affected individuals. Cortisol response to ACTH stimulation was <18.2 µg/dl (500 nmol/l) in 14 NCCAH patients (28%) and none of the heterozygotes or IPP children. Among the 55 NCCAH patients, 54.5% were homozygous for mild CYP21A2 mutations, 41.8% were compound heterozygotes for one mild and one severe CYP21A2 gene mutations, and 3.6% had two severe CYP21A2 gene mutations. CONCLUSION: In children with PP, baseline 17-OHP levels are not useful to rule out the diagnosis of NCCAH, which is accomplished by means of ACTH testing only. The different percentages of severe and mild CYP21A2 gene mutations found in PP children compared with adult NCCAH patients is an indirect evidence that the enzyme defect is under-diagnosed in childhood, and it might not lead to the development of hyperandrogenic symptoms in adulthood. Stress-dose glucocorticoids should be considered in patients with suboptimal cortisol response to ACTH stimulation.

Preconceptional identification of cystic fibrosis carriers in the Sardinian population: A pilot screening program.

BACKGROUND: In Sardinia the mutational spectrum of CFTR gene is well defined. A mutation detection rate of 94% can be achieved by screening for 15 CFTR mutations with a frequency higher than 0.5%. The efficiency of this molecular test suggests that Sardinians may represent a suitable population for a preconceptional screening. METHODS: Five hundred couples of Sardinia descent were screened for 38 mutations using a semi-automated reverse-dot blot and PCR-gel electrophoresis assays. This mutation panel included the 15 most frequent CF alleles in Sardinia. RESULTS: We identified 38 CF carriers, revealing an overall frequency of 1/25 (4%). The most common CF allele was the p.Thr338Ile (T338I) (65%), followed by the p.Phe508del (F508del) (22.5%). We also identified one couple at risk and an asymptomatic female homozygote for the p.Thr338Ile allele. CONCLUSIONS: In spite of the low number of the couples tested, the results herein reported demonstrate the efficacy and efficiency of the preconceptional screening program and the high participation rate of the Sardinian population (99%).

Thyroid function in obese children and adolescents.

OBJECTIVE: Obesity is frequently associated with modifications of thyroid size and function. We evaluated the prevalence of thyroid function abnormalities and the effects of puberty and weight loss in obese children and adolescents. METHODS: We examined 468 obese children (255 girls and 213 boys aged 3.7-17.9 years) and 52 normal-weight age-matched children as controls. TSH, fT3, fT4, fasting serum insulin and glucose were measured at baseline. fT3, fT4 and TSH were also measured after 6 months of lifestyle intervention in a subset of 43 patients. RESULTS: 109 obese children showed abnormal circulating thyroid hormone concentrations (84 had elevated fT3 levels, 15 elevated TSH, 6 elevated fT4, 3 elevated fT3 and TSH, and 1 elevated fT3, fT4 and TSH levels). Serum TSH and fT3 concentrations were positively correlated with BMI-SDS. The prevalence of patients with abnormal thyroid hormone concentrations was similar between sexes and between prepubertal and pubertal subjects. After 6 months of lifestyle intervention, thyroid hormone concentrations normalized in 27 of the patients with decreased BMI-SDS, and in 2 patients in whom BMI-SDS increased. CONCLUSIONS: In obese children, an increased fT3 concentration is the most frequent thyroid function abnormality. Serum fT3 and TSH correlate with BMI. Moderate weight loss frequently restores these abnormalities.

Characterization of thyroglobulin epitopes in Sardinian adults and juveniles with Hashimoto's thyroiditis: evidence against a major effect of age and genetic background on B-cell epitopes.

BACKGROUND: Using recombinant human monoclonal thyroglobulin antibodies expressed as Fab molecules (TgAb-Fab), we have recently confirmed the restriction of Tg epitopes in Hashimoto's thyroiditis (HT). OBJECTIVE: To investigate Tg epitopes of serum TgAb in HT adults and HT juveniles from a geographically isolated area (Sardinia). DESIGN AND PATIENTS: Serum TgAb of 39 Sardinian HT adults, 53 Sardinian HT juveniles and 45 non-Sardinian HT adults were evaluated. The binding of serum TgAb to Tg in ELISA was inhibited by four recombinant human TgAb-Fab, identifying Tg epitopic regions A-D. The percentage of Tg binding inhibition was calculated comparing the binding of serum TgAb in presence of each TgAb-Fab with that in its absence. RESULTS: In the whole cohort of 137 patients, A region TgAb-Fab induced the highest levels of inhibition (55.3 +/- 17.8%) (mean +/- SD). Lower levels of inhibition were induced by TgAb-Fab of regions B (27.8 +/- 25.8%), C (26.8 +/- 24.6%) and D (17.5 +/- 18.4%). In Sardinian HT adults inhibition by TgAb-Fab of regions A, B and C were comparable to Sardinian HT juveniles; the marginal D region TgAb-Fab induced a slightly higher inhibition (22.1 vs. 13.8%; P = 0.034) in the former than in the latter group. In Sardinian and non-Sardinian HT adults inhibitions by the four TgAb-Fab were similar. CONCLUSIONS: In HT, the Tg epitope pattern of serum TgAb was similar in juveniles and adults from a geographically restricted area and in two adult populations from different geographical areas. Thus, in HT, neither age nor genetic background appear to influence B-cell epitopes.

Puberty is associated with a marked increase of the female sex predominance in chronic autoimmune thyroiditis.

BACKGROUND: Chronic autoimmune thyroiditis (CAT) displays a strong female predominance with female-to-male (F:M) ratios of 4-20:1 in adults and 2-9:1 in children and adolescents. Both genetic and hormonal factors are involved in this phenomenon. The relation between puberty and F:M ratio in CAT has never been evaluated. METHODS: The F:M ratio of 133 children with CAT (group A, age at diagnosis 2.4-17.7 years) was compared with that of 113 adult CAT patients (group B, age at diagnosis 21-79 years). Group A included 64 prepubertal (aged 2.4-13.2 years, group A1) and 69 pubertal (aged 9.2-17.4, group A2) children. RESULTS: The F:M ratio in group A was 3.0, which is significantly (p < 0.001) lower than that (10.3) found in group B patients. The F:M ratio of group A1 prepubertal children was lower (1.6) and significantly different from that of pubertal (6.7, p < 0.01) and adult patients (10.3, p < 0.0001). This phenomenon was more evident in hypothyroid as compared to euthyroid CAT. CONCLUSIONS: This study provides the first evidence that female predominance of CAT strongly increases during puberty, suggesting a major role for sex hormones in this phenomenon. Further studies are needed to clarify this point.

Formation and cation distribution in supported manganese ferrite nanoparticles: an X-ray absorption study.

Extended X-ray absorption fine structure (EXAFS) and X-ray absorption near-edge structure (XANES) techniques at both Fe and Mn K-edges were used to investigate the formation of MnFe(2)O(4) nanoparticles embedded in a silica aerogel matrix as a function of calcination temperature (at 450, 750 and 900 degrees C). Up to 450 degrees C, two separated highly-disordered phases of iron and manganese are present. With increasing the temperature (to 750 and 900 degrees C), the structure of aerogel nanoparticles becomes progressively similar to that of the spinel structure MnFe(2)O(4) (jacobsite). Quantitative determination of cations distribution in the spinel structure shows that aerogels calcined at 750 and 900 degrees C have a degree of inversion i = 0.20. A pure jacobsite sample synthesised by co-precipitation and used as a reference compound shows a much higher degree of inversion (i = 0.70). The different distribution of iron and manganese cations in the octahedral and tetrahedral sites in pure jacobsite and in the aerogels can be ascribed to partial oxidation of Mn(2+) to Mn(3+) in pure jacobsite, confirmed by XANES analysis, probably due to the synthesis conditions.

The use of advanced diffraction methods in the study of the structure of a bioactive calcia: silica sol-gel glass.

Sol-gel derived calcium silicate glasses may be useful for the regeneration of damaged bone. The mechanism of bioactivity is as yet only partially understood but has been strongly linked to calcium dissolution from the glass matrix. In addition to the usual laboratory-based characterisation methods, we have used neutron diffraction with isotopic substitution to gain new insights into the nature of the atomic-scale calcium environment in bioactive sol-gel glasses, and have also used high energy X-ray total diffraction to probe the nature of the processes initiated when bioactive glass is immersed in vitro in simulated body fluid. The data obtained point to a complex calcium environment in which calcium is loosely bound within the glass network and may therefore be regarded as facile. Complex multi-stage dissolution and mineral growth phases were observed as a function of reaction time between 1 min and 30 days, leading eventually, via octacalcium phosphate, to the formation of a disordered hydroxyapatite (HA) layer on the glass surface. This methodology provides insight into the structure of key sites in these materials and key stages involved in their reactions, and thereby more generally into the behaviour of bone-regenerative materials that may facilitate improvements in tissue engineering applications.

Chemical recycling of poly(ethylene terephthalate) (PET) by hydrolysis and glycolysis.

In this paper we review an interesting method of PET recycling, i.e. chemical recycling; it is based on the concept of depolymerizing the condensation polymer through solvolytic chain cleavage into low molecular products which can be purified and reused as raw materials for the production of high-quality chemical products. In this work our attention is confined to the hydrolysis (neutral, acid and alkaline) and glycolysis processes of PET chemical recycling; operating conditions and mechanism of each method are reported and described. The neutral hydrolysis has an auto accelerating character; two kinetic models have been proposed: an half-order and a second order kinetic model. The acid hydrolysis could be explained by a modified shrinking core model under chemical reaction control and the alkaline hydrolysis by a first-order model with respect to hydroxide ion concentration. To describe glycolysis, two different kinetic models have been proposed where EG can act or not as internal catalyst. Further experimental and theoretical investigations are required to shed light on the promising processes of PET chemical recycling reviewed in this work.